7 Oaks Timber

Technical Information

Product Reference 
Codes701, 702, 703, 704, 705, 706, 707
SpeciesEuropean Oak
GradeABCD
Size (L x W x Thickness/top) mm1900 x 190 x 14/3mm
Board typeTongue & groove
Pattern1 strip
StructureMixed Eucalyptus & poplar
EdgingMicro- bevel
Pack Size2.166m2
Pack weight20kg
Pack length1920mm
Pieces per pack6
Nesting 25%
Top layer 3mm European oak
Surface finishBrushed UV oiled / UV lacquered (A/Oxcide finishing if UV Lacquered) with gloss 5-10%
Environmental rating/Biological DurabilityClass 1
MaintenanceAs per maintenance instructions- refer to website- www.7Oaks.com.au
Installation Methods 
Fully bondedYes*
Floated on underlayYes*
Over under slab heatingYes*

      *Subject to compatible subfloor and correct installation (Refer to installation instructions)

Test Information & Others 
OriginFrance
EUTRLegally harvested timber
FSCN/A
Janka hardness rating1360 LBF (7.0)
Slip testingUSRV 60
Australian reaction to fire- FLOOR-
Australian reaction to fire- WALL-
Release of formaldehydeE1
Release of 4-phenylcyclohexene ≤5 PPM
Total VOC-
Warranty- Domestic20 year wear & lifetime structual
Warranty- Commercial10 year wear & lifetime structual

Installation & Warranty

All 7Oaks floors must be installed by a competent approved installer who will have the necessary skills and take individual site circumstance into account. 7Oaks warranty will only apply to floors which have been installed according to the 7Oaks installation instructions.

Please note this technical sheet was written by 7Oaks PTY LTD . All information has been specified correctly while writing and publication of the sheet. The company reserves the right to change the specification of this product at any time without prior notice to third parties.

find a reseller!

place your postcode

and we'll provide the closest reseller

Visit the reseller page

by clicking the button

Contact us

Phone

+613 5972 1111

Address

61-63 Access Way
Carrum Downs 3201